Pacifica V6-3.8L VIN L (2005)
2) Install NEW piston seals into caliper piston bores (Fig. 21).
NOTE: Verify seal is fully seated and not twisted.
3) Install NEW boot on each piston and work boot lip into groove at top of piston. Stretch boot rearward straightening boot folds, then move boot
forward as necessary until folds snap into place.
4) Install first piston into caliper piston bore, pressing piston down to bottom of bore using hand pressure (Fig. 22). Using a piece of wood or wooden
hammer handle may also suffice as long as piston and boot damage is avoided.