Pacifica V6-3.8L VIN L (2005)
6) Disconnect primary and secondary brake tubes coming from master cylinder at ABS ICU (Fig. 12). Cap off brake tubes and install sealing plugs in
open brake tube outlet ports of ICU.
7) Remove two nuts attaching master cylinder to power brake booster (Fig. 13).
8) Slide master cylinder straight out of power brake booster.
CAUTION: Seal on rear of master cylinder is used to create seal for holding vacuum in power brake vacuum booster. Vacuum seal on master
cylinder MUST be replaced whenever master cylinder is removed from power brake vacuum booster.
9) Remove vacuum seal located on mounting flange of master cylinder. Vacuum seal is removed from master cylinder by carefully pulling it off rear
of master cylinder. Do not attempt to pry seal off master cylinder by inserting a sharp tool between seal and master cylinder casting.