Pacifica V6-3.8L VIN L (2005)
Valve Cover: Description and Operation
CYLINDER HEAD COVER(S)
DESCRIPTION
The cylinder head covers are made of composite material. The covers are sealed with steel reinforced silicon rubber gaskets. The cylinder head cover
uses rubber isolators at each fastener location (Fig. 33).
NOTE: Due to the tight packaging near the cylinder head covers, which makes spill clean-up difficult, a spill during an engine oil change may be
misinterpreted as an oil leak. When investigating an oil leak in the location of the cylinder head covers and intake manifold, follow the procedure
found in Oil Leak Diagnosis for determining the source of a leak.