Pacifica V6-3.8L VIN L (2005)
5) Apply Mopar(R) Lock & Seal Adhesive (Medium Strength Threadlocker) to each upper intake manifold bolt. Install and tighten bolts to 12 Nm
(105 inch lbs.) following torque sequence in (Fig. 154).
6) Connect the MAP sensor electrical connector (Fig. 155).
7) Connect the brake booster and cruise control vacuum hose to intake manifold (Fig. 155).
CAUTION: The special screws used for attaching the EGR tube to the manifold must be installed slowly using hand tools only. This requirement
is to prevent the melting of material that causes stripped threads. If threads become stripped, an oversize repair screw is available.
8) Install the EGR tube.