Pacifica V6-3.8L VIN L (2005)
be at the bottom.
2. Position the multi-function switch housing onto the top of the steering column. The locating tab in the hub of the turn signal cancel cam must be
engaged with the alignment groove in the bottom of the upper steering column shaft.
3. Install and tighten the screw that secures the multi-function switch housing to the top of the column housing. Torque screw to 1.9 Nm (17 in. Lbs.)
.
4. Install the right multi-function switch onto the multi-function switch housing.
5. Install the left multi-function switch onto the multi-function switch housing (refer to above procedure).
6. Install the clock spring onto the multi-function switch housing.
7. Connect the battery negative cable.
8. Verify vehicle and system operation.