Pacifica V6-3.8L VIN L (2005)
Fuel Pressure Regulator: Service and Repair
REMOVAL
NOTE: THE FUEL PRESSURE REGULATOR IS ON THE PASSENGER SIDE OF THE FUEL TANK.
1. Release the fuel pressure.
2. Disconnect negative battery cable.
Fuel Tank Assembly
3. Remove fuel tank
4. Vacuum area before removing module lock ring.
5. Disconnect lines from top of the module.
Locking Ring Contact Points
6. Remove module lock ring.
NOTE: Use a brass punch to remove the 1/4 turn lock ring.
7. Drain fuel tank, use an approved gasoline draining station.
8. Remove module from fuel tank.