Pacifica V6-3.8L VIN L (2005)
5.
Using a vacuum cleaner, remove any debris from the area around the driver's side fuel pump module lock ring (Figure 5).
6.
Disconnect the vapor line and the electrical connector on the driver's side fuel pump module (Figure 5).
7.
Using a brass punch and hammer, remove the driver's side fuel pump module lock ring (Figure 6).
NOTE:
Use a brass punch to rotate the lock ring 1/4 turn. Make contact only at the points shown in Figure 6.
8.
Lift the fuel pump module top and disconnect the wire connector inside of the tank for the passenger side level sensor.