Pacifica V6-3.8L VIN L (2005)
8.
Disconnect the seat belt retractor electrical connector (Fig. 1).
9.
Remove the two B-pillar seat belt retaining ring mounting screws and then the retaining ring from the B-pillar (Fig. 1).
10.
Remove the seat belt retractor mounting bolt.
11.
Grasp the height adjuster knob cover and gently pull inward, separating it from the seat belt height adjuster.
12.
Remove the turning loop retaining bolt from the seat belt height adjuster.
13.
Remove seat belt and retractor from vehicle.