Pacifica V6-3.8L VIN L (2005)
a. Install hub nut on end of half shaft. (Fig. 2).
b. While a helper applies brakes to keep hub from turning, tighten hub nut to 244 Nm (180 ft. lbs.) torque.
c. Install spring washer, nut lock and cotter pin on end of half shaft (Fig. 2).
10. Install tire and wheel assembly. Tighten wheel mounting nuts to 135 Nm (100 ft. lbs.) torque.
11. Verify proper adjustment of the parking brake shoes and adjust as necessary.
12. Lower vehicle.
13. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
14. Road test vehicle and make several stops to wear off any foreign material on brakes and to seat brake shoes.