PT Cruiser L4-2.4L (2008)
Convertible Top Latch: Service and Repair
Installation
INSTALLATION
1. Position the latch assembly onto the folding convertible top.
2. Install the four screws that secure the latch handle base plate to the header. Tighten the screws securely.
3. Align each latch hook base plate (2) to the previously marked bracket locations.
4. Install the three screws that secure each latch hook base plate to the header. Make sure the position of the brackets align with each previously
marked location. Tighten the screws securely.
5. If required, adjust the latch hook in relation to the dowel pin with the ball socket. The center line of the dowel pin to the center line of the 10 mm
(0.39 in) diameter roller is 44.90 mm (1.77 in).
6. Position the trim panel (2) onto the front header (1) and install the nine retaining screws. Tighten the screws securely.
