PT Cruiser L4-2.4L (2008)
7. Reposition the canopy cover and install the three clips (1) that secure the tension cable (2) to each side of the canopy cover.
8. Install the tension cable (1) onto the spring (2).
9. Install the canopy cover adhesive tape to the front header edges.
10. Install the twelve screws (1) that secure the canopy cover to front header (2).
11. Install the D-handle and washer and secure it with the set screw. Tighten the set screw securely.
12. Close the folding top and verify that the dowel pins are properly aligned with the dowel pin receptacles in the windshield frame mounted strikers
See: Adjustments.
