PT Cruiser L4-2.4L (2008)
Convertible Top Motor: Service and Repair
Installation
INSTALLATION
1. Position the hydraulic pump/motor assembly into the vehicle.
2. Install the hydraulic cylinders (1) onto the main pivot brackets.
3. Install the two bolts (1) that secure each hydraulic cylinder to the main pivot brackets. Tighten the bolts securely.
4. Align each rear seat back support bracket (2) to the previously marked bracket locations.
5. Install the three bolts and two nuts one at a time that secure each rear seat back support bracket. Make sure the position of the bracket aligns with
each previously marked location. Tighten the fasteners securely.