PT Cruiser L4-2.4L (2008)
11. Slide the hub and bearing (7) onto the spindle.
12. Install a NEW hub nut (3) on the spindle. Tighten the nut to 217 Nm (160 ft. lbs.).
13. Install the hub and bearing dust cap (4).
14. If equipped with ABS, Install the wheel speed sensor (2) head into the rear of the support plate. Install and tighten the sensor mounting screw (3)
to 12 Nm (105 in. lbs.).
15. Adjust the brake shoes to the drum diameter using a brake shoe gauge. See: Brake Shoe/Adjustments
16. Install the brake drum (6).
