PT Cruiser L4-2.4L (2008)
10. Remove the adjuster spring (5) from the leading shoe and the lever pawl (3).
11. Remove the lever pawl (3) from the pivot on the leading shoe (4) and slide it out from under the adjuster (6).
12. Remove the adjuster (6) and the upper return spring (2) from the shoes (4, 7).
Brake Shoes - Installation
INSTALLATION
NOTE: Perform STEP 1 through STEP 13 on each side of vehicle to complete shoe set installation, then proceed to STEP 14.
1. Lubricate shoe contact areas on support plate and anchor using Mopar(R) Brake Lubricant or equivalent.
