PT Cruiser L4-2.4L (2008)
9. Disconnect wire connectors (2, 5, and 7).
10. Remove four nuts (1, 3, and 6) attaching headlamp housing (4).
11. Once the fascia (3) is loosened on the appropriate side and there is a gap between the fascia and the headlamp unit (1), place a shop towel
underneath the headlamp unit (2) on the fascia (3) to protect it from scratches and marring.
12. Tilt the bottom of the headlamp unit (1) forward and then pull straight out of fender/fascia opening, taking care not to damage headlamp unit,
fender, or fascia (2).
Headlamp Unit - Installation
INSTALLATION
