PT Cruiser L4-2.4L (2008)
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
NOTE: If installing a new headlamp unit, transfer the bulbs to the new headlamp unit.
1. Connect wire connectors (2, 5, and 7) to the back of headlamp housing (4).
2. Tilt the top of the headlamp unit (1) down and then slide into headlamp unit opening. Take special care not to scratch or mar the fascia (2) or
fender. Remove shop towel when installed.
3. Install nut(s) (1, 3, and 6) attaching headlamp housing (4).