PT Cruiser L4-2.4L (2008)
1. Release hood latch and open hood.
2. Remove the lower seat belt anchor nut (1).
3. Remove the Lower Quarter Trim Panel the side in which you are removing the seat belt and retractor.
4. Remove the four bolts to the rear seat upper bolster.
5. Feed the seat belt webbing (1) through the top of the bolster.
6. Remove the one retaining bolt (2) to the seat belt retractor.
7. Remove seat belt and retractor from vehicle.
Installation
INSTALLATION
1. Position seat belt & retractor into vehicle.
2. Install the one retaining bolt to the seat belt retractor (2). Torque bolt to 40 Nm (30 ft. lbs.).
