PT Cruiser L4-2.4L (2008)
4. Install wheel speed sensor cable (2) into the routing clips (4) on the brake hose.
5. Install the speed sensor cable grommet into the retainer on the brake hose bracket (5).
6. Install the speed sensor cable routing clips (3) on the brake tube (6).
7. Connect the wheel speed sensor cable (5) connector at the body wiring harness (1).
8. Install the wheel speed sensor cable connector into the routing clip (2) mounting it to the vehicle's body (4).
9. Lower the vehicle.
10. Perform the Diagnostic Verification Test and clear any faults. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests
