PT Cruiser L4-2.4L (2008)
8. Insert the end of the pressure hose into the pump (1). Thread the fluid pressure hose tube nut into the pump.
9. Using a crowfoot wrench on a long extension with a torque wrench, tighten the pressure hose tube nut (from below) at the power steering pump to
31 Nm (23 ft. lbs.).
10. Install the four bolts fastening the A/C compressor (1) to the engine. Tighten the mounting bolts to 28 Nm (250 in. lbs.).
11. Install the A/C compressor wiring connectors.
12. Install the A/C drive belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Accessory Drive Belt - Installation