PT Cruiser L4-2.4L (2008)
13. Position the drive-belt splash shield (3) and install the fasteners (4) securing it to the body (2).
14. Install the fastener (5) securing the drive belt splash shield (3) to the front suspension crossmember (6).
15. If previously removed, install the fasteners securing the front fascia (1) to the body lower reinforcement.
16. Install the one fastener (2) securing the wheel house splash shield (1) to the drive belt splash shield (3).
17. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
18. Lower the vehicle.