PT Cruiser L4-2.4L Turbo (2009)
4. Remove the center console (1). See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Removal
5. Grasp the parking brake lever (1) output cable (2) by hand and pull upward. Continue pulling on the cable until an appropriate sized pin punch
(drill bit or locking pin) (3) can be inserted sufficiently through the hole in the left side of the lever mounting bracket. This will lock the parking
brake automatic adjustment mechanism in place and take tension off the parking brake cables. Slowly release the output cable. There should now
be slack in the cables.