PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Towing Hook / Bracket: Service and Repair
Side Rail Tie Down Bracket
SIDE RAIL TIE DOWN BRACKET
REMOVAL
1. Raise the vehicle on hoist.
2. Remove the four bolts (1) attaching the right and left rear side rail shipping tie down bracket.
INSTALLATION
1. Place rear side rail shipping tie down bracket into position the rear frame rail.
2. Install the four bolts (1) attaching both left and right rear side rail shipping tie down bracket to rear frame rail. Tighten bolts to 68 N.m (50 ft. lbs.)
.
3. Lower the vehicle from hoist.