Sebring V6-2.5L VIN N (1997)
![background image](/chrysler/sebring/v6-2.5l_vin_n/Page-1515003.png)
4. Fill the inside of the bearing with Mopar (R) Multi-mileage Lubricant Part No. 2525035 or equivalent.
5. Install the bearings to the shaft on the joint assembly.
6. Wrap plastic tape approximately one and one-half times around the concave circumferences of the bearings, and then press fit the bearings into
the cover assembly.
7. Apply grease to the inside of the lip section of the boot, and then install the boot to the joint.