Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Door Opening Trim Welt
DOOR OPENING TRIM WELT REMOVAL
1. Using trim stick, special tool C-4755, remove one end of door opening trim welt from door opening flange.
2. Separate welt from vehicle.
INSTALLATION
1. Position door opening trim welt on vehicle.
2. Butt end of welt to edge of header/A-pillar weatherstrip.
3. Push door opening welt onto door opening flange.
Cowl Trim Panel
COWL TRIM PANEL REMOVAL
1. Remove door sill trim panel.
2. Remove screws holding cowl trim panel to inner cowl panel.
3. Separate cowl trim panel from vehicle.
INSTALLATION
1. Position cowl trim panel to vehicle.
2. Install screws holding cowl trim panel to inner cowl panel.
3. Install door sill trim panel.