Sebring Convertible V6-2.7L Flex Fuel (2008)
![background image](/chrysler/sebring_convertible/v6-2.7l_flex_fuel/Page-3055003.png)
12. Install the left and right A-pillar trim panels, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/A-Pillar Trim
Panel-Installation.
13. Install the windshield header lower trim panel (1) by pushing the panel upwards until the retaining clips are fully secured to the slots in the power
folding top presenter plate assembly (2).
14. Position the left sunvisor (2) into the vehicle.
15. Connect the left sunvisor electrical connector (3).
16. Install the left sunvisor retaining screws (1).
17. Repeat the installation procedure for the right sunvisor.
18. Connect the battery negative cable.