chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Procedures|Page 7934 > < Procedures|Page 7932
Page 6
background image

TRIM PANEL

REMOVAL

(1) Roll door glass down.
(2) Disengage two clips attaching speaker grille to door trim panel. They are at the front of the grille, one near the top, and the other one at the

bottom.

(3) Remove three large washer-headed screws rounding the speaker (Fig. 28).

(4) Remove access cover at front of door trim panel. Remove by prying at its rear edge (Fig. 29).
(5) Remove red courtesy reflector from lower tail or door. Disengage by prying at screwdriver notch at bottom of reflector.
(6) Remove flag trim panel from door by prying off at two attachment clips points (Fig. 29).

(7) Remove seven screws attaching door trim panel to door: (Fig. 28) and (Fig. 29).

Procedures|Page 7934 > < Procedures|Page 7932