Sebring Sedan L4-2.4L VIN J (2004)
(13) Remove rear door trim panel from vehicle.
INSTALLATION
(1) Position rear door trim panel on vehicle.
(2) Connect linkage to latch handle.
(3) Engage clip holding linkage to latch handle.
(4) Connect wiring harness at door opening.
(5) Position the lock knob through the trim panel and engage trim panel from inner belt weatherstrip at top of door.
(6) Align the clips attaching perimeter of trim panel to rear door with the grommets and engage.
(7) Install screws attaching door trim panel to door. (Fig. 9)