Sebring Sedan L4-2.4L VIN J (2004)
(8) Install screw holding door latch handle to door and close the screw cap.
(9) Install screw from bottom of arm rest pull cup and close the screw cap.
(10) Connect battery.
Rear Shelf Trim Panel
REAR SHELF TRIM PANEL
REMOVAL
1. Remove upper quarter trim panels as necessary. Refer to Trim Panel.
2. Fold seat backs down.
Fig. 21
3. Remove the center plug (Fig. 21).
4. Remove close out panel trim.
Fig. 22
5. Remove push-in fasteners attaching rear shelf trim to shelf panel (Fig. 22).
6. Disconnect the center shoulder belt at the base.
7. Pull trim forward to disengage clip attaching trim to shelf panel.
8. Feed seat belt through the seat belt opening in the shelf panel.