Sebring Sedan L4-2.4L VIN J (2004)
Parking Brake Shoe: Service and Repair
SHOES PARKING BRAKE
REMOVAL
1. Remove disc brake caliper from adapter and rotor.
2. Remove rotor from hub/bearing.
3. Remove dust cap from hub/bearing.
4. Remove hub/bearing rear retaining nut and washer.
5. Remove hub/bearing from knuckle.
6. Remove hold down clip from rear park brake shoe (Fig. 91).
7. Turn park brake shoe adjuster wheel until adjuster is at its shortest length.
8. Remove the park brake shoe adjuster from the park brake shoes (Fig. 92).