Sebring Sedan L4-2.4L VIN X (2001)
4. Remove sun visor from vehicle (Fig. 24).
INSTALLATION
1. Position inside rear view mirror to vehicle.
2. Connect wire connector to rear view mirror, if so equipped.
3. Install screws attaching rear view mirror to header panel.
INSTALLATION - JR-27 (Convertible) ONLY
All vehicles with driver and passenger side airbags must have a colored coded five Bullet point airbag warning label applied to the sun visor, verify label
availability and ensure the label is installed.
1. Position sun visor to vehicle.
2. Connect lighted vanity mirror wire connector.
3. Install screws attaching sun visor to header panel.
4. Engage sun visor to sun visor support.