Town & Country V6-3.3L Flex Fuel (2008)
7. Install the door module (3) into the sliding door.
8. Install the door module mounting fasteners (1).
9. Install the hold open latch.
10. Connect the exterior door handle cable.
11. Connect the lower electrical connector.
12. Install the lower glass channel screws.
13. Instal the rear latch screws.
14. Install the front latch screws.
15. Install the door glass.
16. Install the sliding door trim panel (1) to the door (2).
17. Connect the electrical connectors.
18. Firmly seat the door trim panel to the door.
19. Install the upper rear molding assembly.
20. Install the mounting fastener(3).
21. Install the bezel (1) to the sliding door.
22. Install the mounting fasteners (2) to the door bezel (1).