Town & Country V6-3.8L VIN L (2006)
Floor Distribution Duct
REMOVAL
1. Remove right rear quarter panel and D-pillar trim panels.
Rear Floor Distribution And Adapter Ducts
2. Remove the two screws that secure the rear floor distribution duct to the right inner quarter panel.
3. Slide the rear floor distribution duct forward to disengage it from the rear floor adapter duct and remove the distribution duct from the vehicle.
4. If required, disengage the rear floor adapter duct from the rear HVAC housing and remove the adapter duct from the vehicle.
INSTALLATION
1. If removed, install the rear floor adapter duct onto the rear HVAC housing. Make sure the duct is fully engaged to the housing.
2. Install the rear floor distribution duct to rear floor adapter duct. Make sure the ducts are fully engaged to each other.
3. Install the two screws that secure the rear floor distribution duct to the right inner quarter panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
4. Install the right D-pillar and rear quarter panel trim.