Town & Country V6-3.8L VIN L (2006)
Condenser HVAC: Service and Repair
REMOVAL
WARNING: REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH.
NOTE: Before removing the A/C condenser, note the location of each of the radiator and condenser air seals. These air seals are used to direct air
through the A/C condenser and radiator. The air seals must be reinstalled in their proper locations in order for the A/C and engine cooling systems to
perform as designed.
1. Recover the refrigerant from the refrigerant system.
2. Remove the front fascia.
NOTE: It is not necessary to remove the quick-connect fittings from the transmission oil cooler tapping block when disconnecting the
transmission oil cooler lines from the cooler.
A/C Condenser Left Hand View
3. Disconnect the transmission oil cooler lines from the quick-connect fittings located on the transmission oil cooler tapping block on the left side of
the A/C condenser (combination cooler).