Town & Country V6-3.8L VIN L (2006)
10. Install liftgate sill plate.
11. Install first row seat belt upper turning loop anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
12. Install first row seat belt lower anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
13. Install first and second row seats.
Seat Belt and Retractor Second Row-Right Outboard With Rear HVAC-LWB
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper anchor bolt.
4. Remove liftgate sill plate.
5. Remove upper liftgate trim.
6. Remove second seat belt lower anchor bolt.
7. Remove second seat belt upper anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in
the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.
13. Loosen HVAC unit enough to gain access to seat belt retractor fasteners.
Trim Panel Mounting Bracket
a. Remove bracket around HVAC unit.
Lower Heater Duct
b. Remove air duct.