Town & Country V6-3.8L VIN L (2006)
2.
Install the wire track, p/n 05189397AA, on the back of the driver's air bag, on the four studs (Fig. 1).
3.
Install the driver's air bag in the vehicle. Refer to the detailed installation procedures available in TechCONNECT, under: Service Info, 8 -
Electrical, Restraints, Driver Airbag, Installation.
WARNING:
Do not connect the battery negative cable! Refer to the detailed service information available in TechCONNECT, under: Service Info, 8 -
Electrical/Restraints - Diagnosis And Testing - Airbag System. Personal injury or death may result if the system test is not performed first.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.