Town & Country V6-3.8L VIN L (2006)
Steering Wheel: Service and Repair
STEERING WHEEL
REMOVAL
1. Disconnect and isolate the negative (ground) cable from the battery. Wait at least two minutes for the airbag system reserve capacitor to discharge
before beginning any steering column, instrument panel, or airbag system/component service.
WARNING: WHEN AN UNDEPLOYED AIRBAG IS TO BE REMOVED FROM THE VEHICLE, FIRST DISCONNECT AND
ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE. ALLOW THE AIRBAG SYSTEM RESERVE CAPACITOR TO
DISCHARGE FOR TWO MINUTES BEFORE BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. PERSONAL
INJURY MAY RESULT IF THIS PROCEDURE IS NOT FOLLOWED.
2. Remove the driver airbag mounting screws (Fig. 40).
3. Lift the airbag from its mount and disconnect two airbag squib, speed control and horn connectors (Fig. 41). Remove driver airbag. Properly store
the driver airbag out of the way.