Town & Country V6-3.8L VIN L (2006)
>
HB, continue with Step 2.
>
RS, continue with Step 3.
2.
Inspection of the HB wiper motor is as follows:
a.
Raise the hood.
b.
Using a mirror and a shop light, look at the bottom of the wiper motor and note the color of the label.
>
If the label is white, no further action is required. Return the vehicle to the customer.
>
If the label is yellow, continue with Section C - HB Yellow Label Inspection and Wiper Motor Replacement if Necessary.
3.
Inspection of the RS wiper motor is as follows:
a.
Remove the two center screws holding the cowl grill (Figure 1).
b.
Raise the hood.
c.
Using a 1/2" piece of hard rubber (or equivalent), wedge open the joint between the cowl grill and the wiper module at the right washer
nozzle (Figure 2).
d.
Using a shop light, look into the opening between the cowl grill and the wiper module for the label attached to the wiper motor.
e.
Note the color of the label: