Town & Country AWD V6-3.8L VIN L (2003)
![background image](/chrysler/town_&_country_awd/v6-3.8l_vin_l/Page-1669014.png)
6. Reinstall P.T.U. assembly into vehicle.
7. Check and fill fluids as required.
Outer Half Shaft Seal
OUTER HALF SHAFT SEAL
REMOVAL
The outer half shaft seal is located on the outside of the end cover. The P.T.U. does not have to be removed to replace this seal.
1. Lift vehicle on hoist.
2. Remove right front half shaft from vehicle.
3. Remove seal with a chisel and hammer (Fig. 48).
INSTALLATION
The outer half shaft seal is located on the outside of the end cover. The P.T.U. does not have to be removed to replace this seal.
1. Clean and inspect seal area.