Town & Country AWD V6-3.8L VIN L (2003)
![background image](/chrysler/town_&_country_awd/v6-3.8l_vin_l/Page-1669015.png)
2. Install new seal with seal installer MD998334 (Fig. 49).
3. Reinstall right front half shaft.
4. Check and fill fluids as required.
Differential Carrier Seal
DIFFERENTIAL CARRIER SEAL
REMOVAL
The Power Transfer Unit must be removed from the vehicle to replace this seal.
1. Remove P.T.U. from vehicle.
2. Use a pry bar to remove seal from retainer plate (Fig. 16). Be careful not to damage seal journal when removing seal.
INSTALLATION
The Power Transfer Unit must be removed from the vehicle to replace this seal.
1. Using a large socket, carefully install new seal. The spring side of the seal must face the transaxle differential.
2. Reinstall the P.T.U. into the vehicle.
3. Check and fill fluids as required.
Rear Cover O-Ring
REAR COVER O RING
REMOVAL
1. Raise vehicle on hoist.
2. Remove rear cover retaining bolts (Fig. 50).