Voyager L4-2.4L VIN B (2001)
Fig.5 Upper Bolt And Ground Wire
7. Remove the upper bolt and ground wire (Fig. 5).
8. Remove starter.
INSTALLATION
1. Place starter in position on vehicle.
2. Install the lower bolts to hold starter to transaxle bellhousing.
3. Install the upper bolt and ground wire (Fig. 5).
4. Place solenoid and B+ wires in position on starter terminals (Fig. 4).
5. Install nut to hold B+ wire to terminal.
6. Connect solenoid wire connector onto terminal.
7. Connect battery negative cable.
8. Verify starter operation.
