Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
6. Remove the screws and the lock.
7. Disconnect the electrical connector.
8. Disconnect the lock rods at the lock.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the rear door lock with the screws.
Tighten
Tighten the rear door lock screws to 8 Nm (71 lb.in).
2. Connect the electrical connector.