Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Brake Drum: Service and Repair
Two-Piece Drum
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the wheel.
3. Remove the detent screw from the brake drum.
4. Remove the brake drum.
Installation Procedure
1. Inspect the brake drum.
2. Install the brake drum.
3. Tighten the detent screw to secure the brake drum.
Tighten
Tighten the brake drum detent screw to 4 Nm (35 inch lbs.).
4. Install the wheel.
5. Lower the vehicle.