Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
12. Disconnect the trailing shoe and lining assembly on the right side.
13. Detach the lower return spring.
Installation Procedure
1. Measure the minimum brake lining thickness.
2. Clean the adjuster assembly and apply grease.
NOTICE: If any parts are of questionable strength or quality because of heat discoloration, excessive stress, or wear, the shoes, the springs, or the
adjuster assembly should be replaced.
3. Inspect the threads of the adjuster assembly for smooth rotation.
4. Coat the backing plate with grease at the brake shoe contact points.
