Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
5. Install the trailing shoe and lining assembly with the hold-down spring, the washer, and the pin.
6. Make sure the parking brake cable is properly routed and attached to the shoe lever.
NOTICE: Do not overstretch the lower return spring.
7. Fasten the lower return spring on the shoe.
8. Position the leading shoe and the adjuster assembly against the backing plate.
9. Fasten the lower return spring to the leading shoe.
10. Install the adjuster assembly.
11. Turn the adjuster in as far as possible.
12. Position the spring clip toward the backing plate.
13. Install the leading shoe with the hold-down spring.
