Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
21. Measure the width of the flattened plastic thread of the plastic gauging using a ruler.
22. Inspect the bearing clearance for permissible tolerance ranges. Refer to Connecting Rod, Engine; Specifications.
23. Install the connecting rod bearing caps to the connecting rods.
24. Tighten the connecting rod bearing caps using new bolts.
Tighten the connecting rod bearing cap bolts to 25 Nm (18 ft. lbs.) using a torque wrench. Use the angular torque gauge KM-470-6 to tighten the
connecting rod cap bolts to 30 degrees plus 15 degrees.
25. Install the oil pump.
26. Install the oil pump retaining bolts.
Tighten the oil pump retaining bolts to 10 Nm (89 inch lbs.).
27. Install the oil pump pickup tube.