Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
20. Remove the intake manifold support bracket bolts and the intake manifold.
21. Remove the intake manifold support bracket.
22. Remove the intake manifold retaining nuts/bolts in the sequence shown.
23. Remove the intake manifold.
24. Remove the intake manifold gasket.
25. Clean the sealing surfaces of the intake manifold and the cylinder head.
Installation Procedure
1. Install the intake manifold gasket.
2. Install the intake manifold.
3. Install the intake manifold retaining nuts/bolts in the sequence shown.
Tighten the intake manifold retaining nuts/bolts to 25 Nm (18 ft. lbs.)
4. Install the intake manifold support bracket.
