Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
11. From the engine side of the fire wall, remove the bolts that secure the healer/air distribution case assembly to the fire wall.
12. Remove the heater/air distribution case assembly from the vehicle.
Installation Procedure
1. Clean the O-ring surface areas of dint and contamination.
2. Install two new O-rings onto the A/C suction hose and the liquid evaporator pipe at the fire wall in the engine compartment.
3. Install the heater/air distribution case assembly and tighten the bolts.
Tighten
Tighten the heater/air distribution case assembly retaining bolts (fire wall side) to 8 Nm (71 lb.in).
4. Install the A/C suction hose and liquid evaporator pipes onto the evaporator flange connector block and tighten the nuts.