Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Installation Procedure
1. Lubricate a new O-ring with engine oil. Install the O-ring onto the fuel pressure regulator.
2. Insert the fuel pressure regulator into the fuel rail body.
3. Install the retaining screw.
Tighten
Tighten the fuel pressure regulator retaining screw to 12 Nm (106 lb.in).
4. Connect the fuel line using two wrenches.
5. Connect the vacuum hose to the fuel pressure regulator.
6. Connect the negative battery cable.
7. Perform a leak test of the fuel pressure regulator with the engine OFF and the ignition ON.
