Replace Driver Airbag Module Replacement with Replace Driver Airbag Module
Air Bag: Service and Repair
Airbag Module Deployment (Outside of Vehicle)
Deploy all intact airbag modules that have been
-
Removed from a scrapped vehicle.
-
Found to be defective.
-
Found to have been damaged during transit, storage, or service.
CAUTION: Deploy the airbags only in an evacuated area. Service personnel who must be present during the deployment should be at least 10 meters
(33 feet) in front of the vehicle.
CAUTION: Do not connect the voltage source until completing all other preparations for the deployment of the airbags.
CAUTION: Allow a deployed airbag module to cool for at least 30 minutes before removing it from the vehicle.
CAUTION: Wear gloves and eye protection during the disposal process.
CAUTION: If the deployment falls, disconnect the voltage source and wait 5 minutes before approaching the vehicle.
1. Position the airbag module face up, on flat ground outdoors, at least 10 meters (33 feet) from any obstacles or people.
2. Place a vehicle battery at least 10 meters (33 feet) away from the airbag module.
3. Deploy the airbag module using the deployment tool.
4. Using the proper precautions, dispose of the deployed airbag. Refer to Deployed Airbag Module Disposal Procedure.
See: Deployed Airbag Module Disposal Procedure
