Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Air Bag: Service and Repair
Deployed Airbag Module Disposal Procedure
CAUTION: After an airbag module has been deployed, the surface of the airbag may contain a powdery residue. The powder lubricates the airbag as it
inflates. The dust that is produced as a by-product of the deployment Is unlikely to be harmful, but use the gloves and the safety glasses in order to
prevent any possible irritation of the skin and the eyes.
CAUTION: After deployment, the metal surfaces of the airbag module will be hot. In order to avoid the risk of an injury or a fire, do not place the
deployed airbag modules near any flammable objects, and allow the airbag modules to cool for 30 minutes before handling them.
Deploy an airbag before disposing of it. This includes these in a whole vehicle being scrapped.
If the vehicle is still within the warranty period, contact the Daewoo regional service manager for approval or special instructions before deploying an
airbag module.
Deployed airbag modules should be disposed of in the same manner as any other scrap parts, with the addition of the following steps:
1. Place the deployed airbag in a sturdy plastic bag.
2. Seal the plastic bag securely.
3. Wash your hands and rinse them with water after handling a deployed airbag.
